We supply stud bolts, nuts, blind nuts according to DIN 2510 and stainless steel martensitic spacers and heat resistant steel  X22CrMoV12-1 tempered suitable to high mechanical resistance levels.
This material is suitable to be used for paddles and disks of steam turbines and steam rollers, screws for high temperatures, valves, structural devices of aeroplanes.

This steel X22CrMoV12-1 is corrosion resistance but does not have any pitting resistance in acid reducing solutions, that is usually typical of Class 18/8 stainless steels. This material has the best corrosion resistance to tempered mould, excluding the reviving temperature 430°-450° C and has also a good oxidation resistance up to 650° C in current “on-order” conditions and up to 750°C in fitful “on-order” conditions.

DIN 2510.pdf

PHYSICAL PROPERTIES X22CrMoV12-1

COMPARABLE SPECIFICATIONS
1.4922/1.4923 X22CrMoV12-1/X20CrMoV11-1

NOMINAL CHEMICAL COMPOSITION

Density
g/cm3 20°C 7.7

Modulus of elasticity
N/mm2 20°C 200.000

THERMAL CONDUCTIVITY
W/m.K. (20°C) 27

Specific Heat
J/g.K. (20°C) 460

THERMAL EXPANSION
20°-200°C 11.1
20°-400°C 12.1
20°-600°C 12.5

Magnetic

MECHANICAL PROPERTIES AT ROOM TEMPERATURE


YIELD STRENGTH
RP 0.2 N/mm2 ≥600

TENSILE STRENGTH
Rm N/mm2 800-950

ELONGATION
Z%   ≥40

REDUCTION OF AREA
Z% ≥40

ANNEALED
HB ≤270